Group photo. The course begins with an introduction to ESD. Advancement in the field of electronics has made gadgets more compact, faster and cheaper. This has resulted in indirectly resulted in electronic components that are becoming more and more sensitive to ESD. Fundamentals of ESD covers the important concepts of ESD such as concepts of Faraday caging, laws of induction etc. These concepts are critical in order to understand how ESD becomes a threat to our electronic ind

Training on the go! The purpose of this guideline is to provide a systematic and objective approach to assessing hazards and their associated risks that will provide an objective measure of an identified hazard as well as provide a method to control the risk. It is one of the general duties as prescribed under the Occupational Safety and Health Act 1994 (Act 514) for the employer to provide a safe workplaces to their employees and other related person. Date: 14th April 2026 V

Practical session ongoing. This training provide the most up to date training in the field of fire safety and fire fighting to meet the requirements of modern industries. JKKP or the workplace safety authority of Malaysia will require employer to form a Emergency Response Team in factory or workplace to react to potential emergency incident happened. Our training on Basic Fire Fighting are carried out by highly qualified trainer from Penang Port Fire Department. Participants

Practical session ongoing. On organization shall as a team to establish and maintain plans and procedures to identify the potential for, and responses to, incidents and emergency situations, and for preventing and mitigating the likely illness and injury that may be associated with them. The organization shall review its emergency preparedness and response plans and procedures, in particular, after the occurrence of incidents or emergency situations. The organization shall al

Training ongoing. ANSI ESD TR-53 revision 2022 course covers ESD testing methods per ANSI ESD S20.20 revision 2021 standard requirements. Areas covered include Wrist straps, Footwear, Work garments, Glove & finger cots, Working surfaces, Storage racks, Seating, Soldering Iron/Torque drivers, Flooring, Ground cord, Equipment, Tools, Trolley & Carts, Container and boxes, Packaging & Ionization devices. Date: 30th & 31th March 2026 Client: AT&S Austria Technologie & Systemtechn

Training ongoing. The course begins with an introduction to ESD. Advancement in the field of electronics has made gadgets more compact, faster and cheaper. This has resulted in indirectly resulted in electronic components that are becoming more and more sensitive to ESD. Fundamentals of ESD covers the important concepts of ESD such as concepts of Faraday caging, laws of induction etc. These concepts are critical in order to understand how ESD becomes a threat to our electroni

Training ongoing. Course Introduction: Getting Started with Power BI Desktop (From Basic to In-depth Understanding). Discover how to quickly glean insights from your data using Power BI. This formidable set of business analytics tools—which includes the Power BI service, Power BI Desktop, and Power BI Mobile—can help you more effectively create and share impactful visualizations with others in your organization. In this course, we help you get started with this powerful tools

Discussion on the go. Optimizing Quality and Productivity performance is every organization’s vision and mission to maximize return on investment. It starts with the mindset. Successful world-class organizations today have a culture that is capable of breakthrough change in their employee’s mindset to continuously improve on quality and productivity. World Class organizations lay down stringent, yet achievable levels of operations, whereby it strives to achieve the highest po

Nice group photo. Section 15 (2) (a) of OSHA Act 514 requires of employers the “provision and maintenance of plant and system of work that are, as far as is practicable, safe and without risks to health”. This clearly places the burden of responsibility to provide a safe and healthy working environment on the employer. The employer is also legally bound to provide information, instruction, training and supervision to ensure the safety and health of employees and environmental

Training ongoing. ESD Internal auditing will cover the audit requirements per ANSI ESD s20.20 revision 2021 Requirements. ANSI ESD TR-53 revision 2022 course covers ESD testing methods per ANSI ESD S20.20 revision 2021 standard requirements. Areas covered include Wrist straps, Footwear, Work garments, Glove & finger cots, Working surfaces, Storage racks, Seating, Soldering Iron/Torque drivers, Flooring, Ground cord, Equipment, Tools, Trolley & Carts, Container and boxes, Pack

Discussion on the go. Severe competition among business organizations have pushed the quality performance standards to the next level, so much so there is no room for errors and inefficiencies, leading to the mindset of preventing defects or mistakes as the only way to survive in the marketplace. In that sense Poka-Yoke, a Japanese developed method, which emphasized team-oriented approach and root cause analysis to work out ways and means to prevent operational errors. Date:

Training ongoing. The course begins with an introduction to ESD. Advancement in the field of electronics has made gadgets more compact, faster and cheaper. This has resulted in indirectly resulted in electronic components that are becoming more and more sensitive to ESD. Fundamentals of ESD covers the important concepts of ESD such as concepts of Faraday caging, laws of induction etc. These concepts are critical in order to understand how ESD becomes a threat to our electroni

Practical session ongoing. Every year the numbers of accidents have increasing and it is very vital for employers, as part of their General Duties and Responsibilities in OSHA 514, to provide training and to ensure the forklift operators are equipped with knowledge and skills. In forklift operations. As part of Safety training programs, we are organizing a 1 day training program on Basic Forklift Safety to assist companies in complying to the Regulations and also in minimizin

Training ongoing. The course begins with an introduction to ESD. Advancement in the field of electronics has made gadgets more compact, faster and cheaper. This has resulted in indirectly resulted in electronic components that are becoming more and more sensitive to ESD. Fundamentals of ESD covers the important concepts of ESD such as concepts of Faraday caging, laws of induction etc. These concepts are critical in order to understand how ESD becomes a threat to our electroni

Training ongoing. Internal Audit is a process to determine the effectiveness of implementation of the IATF16949 QMS for Automotive standard. It is a cross functional activity. An ineffective audit can mean severe consequences; resulting in process failure, patient dissatisfaction and regulatory noncompliance. Optimize your auditing skills to boost your internal audit capabilities. Gain confidence in planning and performing an effective audit, as well as reporting and taking c

Practical session ongoing. On organization shall as a team to establish and maintain plans and procedures to identify the potential for, and responses to, incidents and emergency situations, and for preventing and mitigating the likely illness and injury that may be associated with them. The organization shall review its emergency preparedness and response plans and procedures, in particular, after the occurrence of incidents or emergency situations. The organization shall al

Practical session ongoing. Every year the numbers of accidents have increasing and it is very vital for employers, as part of their General Duties and Responsibilities in OSHA 514, to provide training and to ensure the forklift operators are equipped with knowledge and skills. In forklift operations. As part of Safety training programs, we are organizing a 1 day training program on Basic Forklift Safety to assist companies in complying to the Regulations and also in minimizin

Training ongoing. 5S is a reference to a list of five Japanese words which start with S. This list is a mnemonic for a methodology that is incorrectly characterized a “standardized clean-up”, however it is much more than clean-up. 5S is a philosophy and a way of organizing and managing the workspace and work flow with the intent to improve efficiency by eliminating waste. Date: 15th & 16th January 2026 Venue: PGF Insulation Sdn Bhd, Prai, Penang Course Objectives: After att

Training ongoing. This course is designed for non-electrical engineering and technical staff who have to work together with electrical engineers, technicians and electricians involved in projects to ensure the safe design, construction, operation and maintenance of electrical power system in compliance with Malaysian Electricity Supply Act 1990 and Electricity Regulations 1994 including Energy Efficiency and Conservation Act EECA 2024 & Regulations EECR 2024 for the efficient

Training on the go. Internal Quality Audit is a very good training that will enable you to audit in a very effective manner. This many effective ways of auditing skills have been proven to help participants to effectively apply the auditing skills learned in their working environment. Date: 16th & 17th December 2025 Venue: Formosa Prosonic Industries Berhad, Sungai Petani, Kedah Course Objectives: At the end of this course, the participants should be able to: Understand wha